Dormakaba ES 250 PRO - Functional parameterization sticker; Label and apply sticker

64
WN 059677 45532 - 11/2023
ES 250 PRO/ES 250 PRO FST
ES 400 PRO/ES 400 PRO FST
Mounting instructions
9 Functional parameterization sticker
1. Label the functional parameterization sticker.
Fig.100
HLNC NC
NO
MP1:
MP2:
MP3:
MP4 (NB):
NO
edge status latc
hF
UNCTION PARAMETERIZATION
l1:
l2:
l3:
l4:
O1:
O2:
O3:
O4:
KS short L:
KS long L:
KS short R:
KS long R:
H High active KS short L Key switch short left
L Low active KS long L Key switch long left
NC Normally closed KS short R Key switch short right
NO Normally open KS long R Key switch long right
MP1–MP3 Multiport 1–3 edge rising/falling edge
MP4 (NB) Multiport 4 (night/bank) status Level analysis
I1–I4 Input 1–4 latch Current pulse
O1–O4 Output 1–4
2. Stick the functional parameterization sticker onto the control unit.
Fig.101
H L NC
NC
NO
MP1:
MP2:
MP3:
MP4 (NB):
NO
edge status latch
FUNCTION PARAMETERIZATION
l1:
l2:
l3:
l4:
O1:
O2:
O3:
O4:
KS short L:
KS long L:
KS short R:
KS long R: