Instructions for use | Atlan A300, A300 XL, A350, A350 XL SW 1.0n 69
Assembly and preparation
Assemble the breathing circuit and connect it to the Y-piece and nozzles on the
breathing system. Observe the following information: "Permissible hose
configurations", page 69.
When attaching or removing the breathing hoses, always hold them by the
connection sleeve and not by the hose itself.
4.8.1.1 Permissible hose configurations
Breathing hoses, sample line, and filters, etc., must be arranged carefully and
adapted to the patient, particularly for neonates and pediatric patients. For further
information see: "Improving the CO
2 measurement by means of an HME filter",
page 308.
35636
To Next Page
Loading...
