Dräger Oxylog 2000 plu - Parameter and Information Display

Configuration
70
Instructions for Use Oxylog 2000 plus SW 1.n
Set configuration parameters / display information
The actual screen display may differ in appearance
or configuration.
1 Switch the Oxylog 2000 plus ON. Press the
O
key.
The device performs a self-test and the
operator is prompted to enter the configuration
menu or device check:
Press rotary knob for device check and con-
figuration.
2 Press the rotary knob and confirm.
The main menu is then displayed:
Select and confirm Configuration and informa-
tion.
screen 15