Instructions for Use Oxylog 2000 plus SW 1.n 71
Configuration
Displaying configuration and information
– The settings made via the "Configuration" are
retained after the ventilator is switched OFF.
– Configuration can be cancelled by pressing the
Alarm reset key or by startup of ventilation.
The following settings can be made for the applica-
tion concerned via Configuration and informa-
tion:
– Language
The following ventilator data can be displayed via
Configuration and information:
– Identification No. (Device-ID)
– Total hours of operation (Working hours)
– Hours of operation since the last inspection and
maintenance (Hours since service time)
– Battery type and battery capacity.
3 Select and confirm Configuration and infor-
mation.
Set language
1 Press the key Settings to select the
menu Configuration and information .
2 Select and activate the line Language.
3 Select the language and confirm.
The new language selected is effective
immediately.
Display the battery type
z Press the key Settings to select the
menu Configuration and information .
The performance data of the inserted battery
are displayed on the device.
screen 16
1/2
screen 16screen 17
2/2
To Next Page
Loading...
