Instructions for Use Oxylog 2000 plus SW 1.n 67
Monitoring
Displaying other measured values
Additional measured values are displayed in the
measured values window.
Refer to the "Operating concept" section on
page 24 for additional information.
To switch between the values:
z Press the lower Values key: the next
value is displayed on the screen.
In the values window five different values can be
displayed.
These five values can be selected out of eight
measured values options, in any desired order.
Refer to "Abbreviations" on page 16. These options
are:
–O
2
–RR
–RRsp
– PEEP
–Pmean
–PIP
–Pplat
–MVe
spon
The five values displayed in the measured values
window can be configured in the customer service
mode. Refer to the "Set the measured values dis-
play window" on page 75 for additional information.
To Next Page
Loading...
