Dräger Oxylog 2000 plu - Date, Time, and Display Customization

Instructions for Use Oxylog 2000 plus SW 1.n 75
Configuration
Set date and time
The date and time can be set.
1 Set the current date and time with the positions
Year, Month, Day, Hour and Minute and confirm.
2 The date and time can be confirmed with »Set«.
Set the measured values display window
In the measured values window five different
values can be displayed.
These five values can be selected out of a total of
eight measured values, in any desired order.
These are:
–O
2
–RR
–RRsp
– PEEP
–Pmean
–PIP
–Pplat
–MVe
spon
To define the five values to be displayed:
z Start configuration on page 1/5 and continue
through to 5/5.
Enter activation code
The activation codes for options can be entered.
The activated options are then displayed.
Test buttons and potentiometer
The operating elements on the front panel are dis-
played schematically on the screen.
– Display = screen
– B = buttons
10237170screen 32
NOTE
It is recommended that you have the O2 value as
a displayed value.
screen 25