Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
124
Available settings are explained as follows:
Item Description
QoS Type
Select a proper QoS type for the channel according to the
information that your ISP provides.
PCR
It represents Peak Cell Rate. The default setting is “0”.
SCR
It represents Sustainable Cell Rate. The value of SCR must
be smaller than PCR.
MBS
It represents Maximum Burst Size. The range of the
value is 10 to 50.
PVC to PVC Binding
It allows the enabled PVC channel to use the same ADSL
connection settings of another PVC channel. Please choose
the PVC channel via the drop down list.
After finished the above settings, click OK to save the settings.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering