Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
304
Advanced – This button is available only when LAN to
LAN profile (or more) is created.
Detailed information for this dialog, see later section -
Advanced Load Balance and Backup.
Load Balance Profile List
Set to Factory Default - Click to clear all VPN
TRUNK-VPN Load Balance mechanism profile.
No - The order of VPN TRUNK-VPN Load Balance
mechanism profile.
Status - “v” means such profile is enabled; ”x” means such
profile is disabled.
Name - Display the name of VPN TRUNK-VPN Load
Balance mechanism profile.
Member1 - Display the dial-out profile selected from the
Member1 drop down list below.
Active - “Yes” means normal condition. ”No” means the
state might be disabled or that profile currently is set with
Dial-in mode (for call direction) in LAN-to-LAN.
Type - Display the connection type for that profile, such as
IPsec, PPTP, L2TP, L2TP over IPsec (NICE), L2TP over
IPsec(MUST) and so on.
Member2 - Display the dial-out profile selected from the
Member2 drop down list below.
Advanced – This button is only available when there is one
or more profiles created in this page.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering