8 USING THE CONTROLLER
GO TO Chap. 8.1 - Controller information
GO TO Chap. 8.2 - Display and key description
GO TO Chap. 8.3 - Measurement menu
GO TO Chap. 8.4 - Statistics menu
GO TO Chap. 8.5 - Alarm management and display
GO TO Chap. 8.6 - Reset menu
GO TO Chap. 8.7 - Communication interfaces
GO TO Chap. 8.8 - Manual power factor correction mode
GO TO Chap. 8.9 - Presence of blocking reactors
GO TO Chap. 8.10 - Firmware update
GO BACK TO CONTENTS
8.1 Controller information
8.1.1 Model and Serial Number
The information relating to model (with relevant Part Number) and Serial Number of the R5 Controller can be inferred
from the silver plate affixed on enclosure right side.
The same information can be also inferred from the RS485, Radio 868MHz communication interfaces and through
the Ducati Smart Energy App. For further information, refer to Chap. 8.7 - Communication interfaces.
8.1.2 Firmware Version
For further details, refer to the complete manual available on:
https://www.ducatienergia.com/product.php?lang=en&id=8&cat=13&product=89
GO BACK TO USING THE CONTROLLER
GO BACK TO CONTENTS
To Next Page
Loading...
