8.10 Firmware update
R5 Controller firmware can be updated by using one of the communication interfaces described in Chap. 8.7 -
Communication interfaces.
In particular:
- for RS485 serial connection (in the models where available), refer to the protocol document available at the
following link: https://www.ducatienergia.com/product.php?lang=en&id=8&cat=13&product=89
- for 868Mhz Radio interface (in the models where available), refer to the documents of Ducati Energia Energy
Bridge device, available at the following link: www.ducatienergia.com
- for NFC interface, use an Android-compatible device and download the Ducati Smart Energy App by framing the
QR-code:
GO BACK TO USING THE CONTROLLER
GO BACK TO CONTENTS
To Next Page
Loading...
