1 R5 MODELS
R5 POWER FACTOR
CONTROLLER
R5 485 POWER FACTOR
CONTROLLER
R5 RADIO POWER FACTOR
CONTROLLER
R5 485 RADIO POWER FACTOR
CONTROLLER
R5 INT POWER FACTOR
CONTROLLER
R5 485 INT POWER FACTOR
CONTROLLER
R5 RADIO INT POWER FACTOR
CONTROLLER
R5 RADIO 485 INT POWER
FACTOR CONTROLLER
Refer to Chap. 3 - TECHNICAL FEATURES for the details on the options listed in the table
GO BACK TO CONTENTS
2 WARNINGS
Carefully read this guide before using the power factor controller
The purpose of this guide is to provide the information to install and start using the models of the range of R5 power
factor controllers.
The device must be installed and wired by qualified personnel.
An automatic switch or a disconnector must be integrated with the electric system, duly positioned near the controller,
and easily accessible by the operator. It must be marked as equipment disconnecting device: IEC/EN 61010-1 § 6.11.2
Risk of electrocution, burns and electric arc. Obtain the personal protective equipment appropriate to fulfil the current
electrical safety standards.
Before making the connections, check the power supply disconnection with a voltage detection device that must be
placed close to the power factor controller or, however, be easily accessed by the operator.
If necessary, clean the instrument using only a damp cloth.
The updated version of this manual and the complete operating manual are available on line at the link
https://www.ducatienergia.com/product.php?lang=en&id=8&cat=13&product=89
GO BACK TO CONTENTS
Do not dispose of the device as mixed municipal waste
The manufacturer, Ducati energia S.p.A. declares that R5 Controllers comply
with the 2014/53/EU directive.
The complete text of the EU declaration of conformity is available at the
following internet address:
https://www.ducatienergia.com/product.php?lang=en&id=8&cat=13&product=89
To Next Page
Loading...
