that will be alternately shown with the numerical value corresponding to the alarm activations.
For alarm settings, refer to Chap. 7.3.1 - Cosphi setpoint, Chap. 7.3.2 - Cosphi setpoint tolerance and to parameter
P.23 – Power factor correction failed alarm delay (Chap. 7.6).
The next displayed page relates to the micro-interruptions alarm on the network voltage. The following screen will
appear:
that will be alternately shown with the numerical value corresponding to the alarm activations.
For alarm settings, refer to P.20 – Micro-interruption duration (Chap. 7.6).
To quit the Statistics Menu and go back to the Measurement Menu press key for more than 2sec.
GO BACK TO USING THE CONTROLLER
GO BACK TO CONTENTS
To Next Page
Loading...
