76
Message Cause and Solution
Cause: Cannot print.
Solution: This message is displayed if you press the
PRINT key or TEST PRINT key
without making a master immediately
after a master setting error or when
confidential safeguard function is “ON”.
Cause: Printing is not complete.
Solution: Either press the PRINT key to resume
printing or press the CLEAR key to
clear the counter.
Cause: A master is being made.
Solution: Wait until it is completed.
Cause: The printer is not ready.
Solution: Wait a while with the power turned ON.
If this message does not disappear after
several minutes, turn the power OFF and
contact service person.
Cause: An error has occurred inside of the machine.
Solution: Take note of error code (EXXX).
Turn off the power and then turn on the
power again. If the problem still persists, turn
off the power and contact our service
person. If contact information is displayed in
the LCD panel, follow it. Explain the error
code (EXXX) and details of the error to the
service person.
- - PRINTING - -
PLEASE MAKE MASTER
- - SCANNING - -
- - WAIT - -
E x x x CALL SERVICE
To Next Page
Loading...
