2-2
99T-M12M0-0107-0
1. BLOCK DIAGRAM OF STRUCTURE AND OUTLINE OF EACH BLOCK
1-28. Remote unit (RM unit)
1-5. Conveyance motor
1-3. MK unit
1-2. OP unit
(Control panel)
1-1. MC unit
1-6. Index sensor
1-7. Paper feed tray A (B) motor
1-8. Paper feed tray A (B) suction fan
1-9.
Paper feed tray A (B) separator fan
1-10.
Paper feed tray A (B) paper feed clutch
1-11.
Paper feed tray A (B) suction valve solenoid
1-12. Reversal switching solenoid
1-13. Reversal clutch 1 (2)
1-14. Reversal sensor
1-15. Reversal counter
1-4. End mark sensor (Upper/lower)
1-16.
Upper door, lower door, bridge door switches
1-17.
Paper size detection sensor 1 (2)
1-18. Paper ejection switch
1-19.
Paper feed tray A (B) level sensor
1-20.
Paper feed tray A (B) double-feed detection sensor
1-21.
Paper feed tray A (B) no-paper detection sensor
1-22.
Paper feed tray A (B) upper limit position switch
1-23.
Paper feed tray A (B) lower limit position switch
1-27. Switching power supply
1-30. Main power switch
1-29. Remote switch
1-24.
D-PORT connector 1 (2)
1-31.
Power supply inlet
1-25. LED 1
1-26. LED 2
1-33. Power cord
1-32. IF cable
To Next Page
Loading...
Need help?
General