Duplo DSF-2000 - When the Error Message “Finisher Error” is Displayed

2-23 99T-M12M0-0107-0
6-2. LCD Map (Maintenance Menu)
NOTE : In the sensor check mode, the sensor state will be displayed as “On” or “Off”.
Maintenance Menu (Initial screen)
Select M. Mode
ROM Version
MC ROM Version
xxx-nnnnn
TRAY ROM Version
xxx-nnnnn
OP ROM Version
xxx-nnnnn
MARK ROM Version
xxx-nnnnn
F1 ROM Version*
xxx-nnnnn
F2 ROM Version
xxx-nnnnn
Select M. Mode
Simulation Mode
Simulation
P.Less Running
Select M. Mode
Sensor Check
Sensor Check
A.Level On
Sensor Check
B.Level On
Sensor Check
A.Paper On
Sensor Check
B.Paper On
Sensor Check
A.Double On
Sensor Check
B.Double On
Sensor Check
A.Lower SW On
Sensor Check
B.Lower SW On
Sensor Check
Limit SW On
∗ ROM version of the DBM-120