19
800.788.5572 DuraLabel.com
PaPer recommendations
For paper lengths exceeding 14" use paper stock between 24-34 lb and the face up
(rear) paper stacker.
Use the multi-purpose tray for printing on envelopes. Up to 10 envelopes can be
loaded at one time, subject to a maximum stacking depth of .4".
7.3 Face Down Stacker
The face down stacker on the top of the printer can hold up to 150 sheets of 20 lb
standard paper, and can handle paper stocks up to 50 lb.
Pages printed in reading order (page 1 first) will be sorted in reading order (last page
on top, facing down).
The number of sheets that can be stacked on the face down stacker may vary
depending on environment.
7.4 Face Up Stacker
When required for use, the face up stacker at the rear of the printer should be
opened and the tray extension pulled out. In this condition paper will exit via this
path, regardless of driver settings.
The face up stacker can hold up to 100 sheets of 20 lb standard paper, and can
handle stocks up to 60 lb.
Always use this stacker and the multi-purpose feeder for paper stocks heavier than
50 lb.
7.5 Duplexing
Automatic two-sided printing is available for the same range of paper sizes as Tray 2
(i.e. all cassette sizes except A6), using paper stocks from 17-50 lb.
To Next Page
Loading...
