66
DuraLabel.com 800.788.5572
Maintenance
11.2 Cleaning
Use a clean, moist, lint-free cloth for cleaning. Do not use benzine,
thinners or alcohol as a cleaning agent.
UNIT CASING
1. Turn the printer off.
2. Wipe the unit surface with a soft cloth
moistened sparingly with water or
neutral detergent.
3. Use a soft dry cloth to dry the unit
surface.
4. Turn the printer on.
LED HEAD
Clean the LED heads when printing is unclear, has white lines or when text
is blurred.
There is no need to turn off the printer to clean the lens.
1. Press the cover release and open the printer’s top cover fully.
2. Gently wipe the LED head surface with a clean, lint free cloth.
Do not use methyl alcohol or other solvents on the LED head as
damage to the lens surface will occur.
3. Close the top cover and press down firmly at both sides so that the cover
latches closed.
To Next Page
Loading...
