DuraLabel Catalyst - PPR Emulation

43
800.788.5572 DuraLabel.com
Menu functions
LEFT MARGIN 0.0INCH ~ 1.0INCH Specifies the distance of print from the left
hand edge of the paper.
TOF POSITION 0.0INCH ~ 1.0INCH Specifies the distance of print from the top
edge of the paper.
FORM LENGTH 11 INCH
11.7 INCH
12 INCH
Specifies the length of paper.
LINE LENGTH 80 COLUMN; 136
COLUMN
Specifies the number of characters per line.
CR FUNCTION CR / CR+LF Selects whether a received carriage return
character (0Dh) also causes a line feed.
WHITE PAGE SKIP OFF / ON Selects whether blank pages are printed or
not.
LINE PITCH 6 LPI; 8 LPI Specifies the line spacing.
ZERO CHARACTER NORMAL
SLASHED
Sets the zero to be slashed or unslashed.
LETTER 0 STYLE DISABLE
ENABLE
Specifies the style that replaces 9BH with
letter o and 9DH with a zero
SYMBOL SET IBM-437
(Default Symbol Set only shown)
Specifies a symbol set.
CHARACTER SET SET-1
SET-2
Specifies a character set.
PPR EMULATION
This menu controls settings effective when the printer is operating in PPR emulation
mode.
ITEM SETTINGS EXPLANATION
CHARACTER PITCH 10 CPI; 12 CPI;
17 CPI; 20 CPI;
PROPORTIONAL
Specifies character pitch in IBM PPR
emulation.
TEXT HEIGHT SAME
DIFF
Sets the height of a character. SAME:
Regardless of CPI, same height DIFF: As CPI,
character heights vary.
FIT TO LETTER DISABLE
ENABLE
Sets the printing mode that can fit print
data, equivalent to 11 inches (66 lines), in
the LETTER-size printable area.
LEFT MARGIN 0.0INCH ~ 1.0INCH Specifies the distance of print from the left
hand edge of the paper.
TOF POSITION 0.0INCH ~ 1.0INCH Specifies the distance of print from the top
edge of the paper.
FORM LENGTH 11 INCH
11.7 INCH
12 INCH
Specifies the length of paper.
FX EMULATION (continued)