57
800.788.5572 DuraLabel.com
Menu functions
PRINT STATISTICS
This menu should only be changed by the System Administrators. In order to gain
access to this menu, follow the instructions in “10.3 How to change the settings -
administrator” section, but hold down the Menu button instead of the OK button. In
this case, the default password is 0000.
This menu is in ENGLISH only.
ITEM SETTING EXPLANATION
ENTER PASSWORD nnnn Enters a password to enter Print Statistics menu.
The default password is “0000.”
“Print Statistics” category is not shown when
Print Statistics function is not supported.
USAGE REPORT ENABLE/
DISABLE
Enables/Disables the printing of the Usage Report.
When changing a setting value, the printer is
rebooted.
GROUP COUNTER ENABLE/
DISABLE
Specifies if the Group counter is displayed in the
Usage Report Print.
Enable: Displayed,
Disable: Not displayed.
Conditions for display: Enable must be selected in
Print Statistics > Usage Report.
SUPPLIES REPORT ENABLE/
DISABLE
Indication of frequency of consumable exchange/non
indication is set.
When Enable is set, also the maintenance counter is
indicated in together.
Conditions for display: Enable must be selected in
Print Statistics > Usage Report.
RST MAIN CNT EXECUTE Zeros the counter
CHANGE
PASSWORD
NEW
PASSWORD
**** Sets a new password to enter Print Statistics menu.
VERIFY
PASSWORD
**** Verifies the change
To Next Page
Loading...
