69
800.788.5572 DuraLabel.com
Troubles hooTing
12.3 Clearing Paper Jams
1. If a sheet is well advanced out of the top of the printer, simply grip it and pull
gently to draw it fully out. If it does not remove easily, do not use excessive
force. It can be removed from the rear later.
2. Press the cover release and open the printer’s top cover fully.
If the printer has been powered on, the fuser will be hot. This area
is clearly labelled. Do not touch.
3. Holding it by its handles, lift the image drum assembly, complete with the toner
cartridges, up and out of the printer.
4. Put the assembly down gently onto a piece of paper to prevent toner from
marking your furniture and to avoid damaging the green drum surface, and
cover.
The green image drum surface at the base of the Image Drum is
very delicate and light sensitive. Do not touch it and do not expose it to normal
room light for more than 5 minutes. If the drum unit needs to be out of the
printer for longer than this, please wrap the cartridge inside a black plastic
bag to keep it away from light. Never expose the drum to direct sunlight or very
bright room lighting.
To Next Page
Loading...
