44
DuraLabel.com 800.788.5572
Menu functions
LINE LENGTH 80 COLUMN; 136 COLUMN Specifies the number of characters per line.
LF FUNCTION LF / LF+CR Selects whether a received line feed
character (0Ah) also causes a carriage
return.
CR FUNCTION CR / CR+LF Selects whether a received carriage return
character (0Dh) also causes a line feed.
WHITE PAGE SKIP OFF / ON Selects whether blank pages are printed
or not.
LINE PITCH 6 LPI; 8 LPI Specifies the line spacing.
ZERO CHARACTER NORMAL
SLASHED
Sets the zero to be slashed or unslashed.
LETTER 0 STYLE DISABLE
ENABLE
Specifies the style that replaces 9BH with
letter o and 9DH with a zero
SYMBOL SET IBM-437
(Default Symbol Set only shown)
Specifies a symbol set.
CHARACTER SET SET-1
SET-2
Specifies a character set.
FONT CONDENSE 12CPI TO 20CPI
12CPI TO 12CPI
Specifies 12CPI pitch for Condense Mode.
PCL EMULATION
This menu controls settings effective when the printer is operating in PCL emulation
mode.
ITEM SETTINGS EXPLANATION
FONT SOURCE RESIDENT / RESIDENT2 Specifies the location of the PCL default font. Normally
this will be INTERNAL unless additional fonts are installed
in the expansion ROM slot or additional fonts have been
downloaded to RAM as permanent fonts.
TRAY ID#
MP TRAY
TRAY 2
1 ~ 4 ~ 59
1 ~ 5 ~ 59
Sets the # to specify the MP tray for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
Sets the # to specify Tray 2 for the paper feed destination
command (ESC&l#H) in PCL5e emulation.
(Displayed only if Tray 2 is installed).
PEN WIDTH
ADJUST
ON/OFF When minimum width is specified in PCL, sometimes a
1-dot line, looks broken.
With PEN WIDTH Adjust set to ON, when the minimum
width is specified, the line width will be emphasized so as
to look wider than a 1-dot line.
With PEN WIDTH Adjust set to OFF, the line will appear as
before.
TRUE BLACK OFF / ON Selects whether black image data is printed using black
toner (ON) or 100% CMY (OFF). (Valid in PCL emulation
mode only.)
PRINT MARGIN
NORMAL
1/5 INCH
1/6 INCH
Sets the non-printable page area. NORMAL is PCL
compatible.
PPR EMULATION MENU (continued)
To Next Page
Loading...
