54
DuraLabel.com 800.788.5572
Menu functions
DRUM
CLEANING
ON
OFF
Sets whether to rotate the drum in idle prior to printing in
order to reduce any horizontal white lines.
CAUTION: Each additional rotation will shorten the ID
life by that amount.
HEX DUMP EXECUTE Prints out data received from the host PC in hexadecimal
Dump. Turning off the power supply switch restores
Normal Mode from HEX Dump Mode.
ADMINISTRATOR MENU
This menu should only be changed by the System Administrators. In order to gain
access to this menu, follow the instructions in “10.3 How to change the settings -
Administrator” section.
This menu is in ENGLISH only.
ITEM SETTINGS EXPLANATION
ENTER PASSWORD xxxxxxxxxxxx Enter a password to gain entry to the Admin menu.
Password should be from 6 to 12 digits of alpha/
numeric characters (or mix)
The default value is “aaaaaa”
OP MENU ALL CATEGORY ENABLE
DISABLE
Set up ENABLE/DISABLE condition for all categories
in USERS MENU.
PRINT JOBS
MENU
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for PRINT JOB
MENU category.
If DISABLE is selected, PRINT JOBS MENU category
of USERS MENU will not appear.
Display Condition: SD card must be installed.
INFORMATION
MENU
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for
INFORMATION MENU category.
If DISABLE is selected, INFORMATION MENU
category of USERS MENU will not appear.
PRINT MENU ENABLE
DISABLE
Set up ENABLE/DISABLE condition for PRINT MENU
category.
If DISABLE is selected, PRINT MENU category of
USERS MENU will not appear.
MEDIA MENU ENABLE
DISABLE
Set up ENABLE/DISABLE condition for MEDIA MENU
category.
If DISABLE is selected, MEDIA MENU category of
USERS MENU will not appear.
COLOR MENU ENABLE
DISABLE
Set up ENABLE/DISABLE condition for COLOR
MENU category.
If DISABLE is selected, COLOR MENU category of
USERS MENU will not appear.
SYS CONFIG
MENU
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for SYS.CONFIG
MENU category.
If DISABLE is selected, SYS.CONFIG MENU category
of USERS MENU will not appear.
SYS ADJUST MENU (continued)