21
800.788.5572 DuraLabel.com
Loading paper
4. Adjust the rear stopper (a) and paper guides (b) as tight as possible to the size
of paper being used.
5. Close the paper tray gently.
To prevent paper jams:
•Do not leave space between the paper and the guides and rear stopper.
•Do not overfill the paper tray. Capacity depends on the type of paper stock.
•Do not load damaged paper.
•Do not load paper of different sizes or types at the same time.
•Close the paper tray gently.
•Do not pull the paper tray out during printing (except as described in the
following note for Tray 2).
b
a
3. Load paper (letterhead face down and top edge towards the front of the printer),
as shown.
To Next Page
Loading...
