52
DuraLabel.com 800.788.5572
Menu functions
ITEM SETTINGS EXPLANATION
MONO-PRINT
SPEED
AUTO
COLOR SPEED
NORMAL SPEED
Sets the monochrome print speed. Prints at the most
appropriate speed for page process if Auto is set. Prints
always at the color print speed if Color is set. Prints
always at the monochrome print speed if Normal is set.
TONER SAVE
COLOR
ALL
EXCEPT 100% BLACK
Specify toner save for 100% black.
All: Enables toner save for all colors.
Except 100% Black: Disables toner save for 100% black.
TONER SAVE
LEVEL
OFF
LOW
MIDDLE
HIGH
Set the toner save level.
RESOLUTION 600DPI
600x1200DPI
600DPI M-LEVEL
Sets the default resolution for printing (dots per inch).
600x1200DPI uses more memory and requires more
time to process, but prints at a higher quality.
OVERRIDE A4/LT YES
NO
If enabled, when the paper size of a job is set to A4 but
there is no A4 set in the printer, if there is Letter paper in
the printer, the job will be printed on Letter paper without
requesting the user to fill the paper tray with A4 paper.
Similarly, when the paper size of a job is set to Letter but
there is no Letter set in the printer, if there is A4 paper
in the printer, the job will be printed on A4 paper without
requesting the user to fill the paper tray with Letter
paper.
MEDIA CHECK ENABLE
DISABLE
Determines whether the printer check the size of paper
loaded matches that required for the document sent to
print.
MP TRAY USAGE DO NOT USE
WHEN MISMATCH
If a document to be printed demands a paper size
not installed in the selected tray, the printer can
automatically feed from the multi-purpose tray instead.
If this function is not enabled, the printer will stop and
request the correct size of paper to be loaded.
TRAY SEQUENCE DOWN
UP
PAPER FEED TRAY
Determines tray sequence order when automatically
switching.
AUTO TRAY SWITCH ON
OFF
If two trays contain identical paper, the printer can switch
to an alternative source when the current tray runs out in
the middle of a print job.
PAPER FEED TRAY1
TRAY2
MP TRAY
Selects the default tray for paper feed, Tray 1 (upper),
Tray 2 (lower, if installed) or MP Tray (multi-purpose tray).
DUPLEX LAST
PAGE
SKIP BLANK
PAGE ALWAYS PRINT
When Skip Blank Page is selected and a print job has an
odd number of pages, the final page will be printed as
Simplex.
When Always Print is selected and the print job contains
an odd number of pages, the final page will be printed
as Duplex.
DUPLEX ON
OFF
Switches the Duplex (2 sided) function ON/OFF.
PRINT MENU (continued)
To Next Page
Loading...
