Programming
102 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
To create a seam program:
1. Press the desired button.
The user interface for setting the desired item is displayed.
Set securement seam beginning left needle
The display switches to Securement seam beginning left
needle.
Fig. 85: Set securement seam beginning left needle
Symbols Meaning
Select stitch condensing
• Set stitch length for stitch condensing at seam beginning
(0.5 - 3.5 mm)
• Set number of stitches for stitch condensing at seam
beginning (0 - 10)
Select single tack
• Set stitch length for single tack at seam beginning
(0.5 - 3.5 mm)
• Set number of stitches for single tack at seam beginning
(0 - 10)
Select double tack
• Set stitch length for double tack at seam beginning
(0.5 - 3.5 mm)
• Set number of stitches for double tack at seam beginning
(0 - 10)
To Next Page
Loading...
