DURKOPP ADLER 745-35-10 A - Page 132

Programming
130 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Set blowing mode
 The display switches to Blowing mode.
Fig. 110: Set blowing mode
To select blowing mode:
1. Press the desired button.
Symbols Meaning
Function off
1: Lower pickup folder
2: Blowing ON at flap clamp + folding plate
1: Lower pickup folder
2: Blowing ON at folding plate
3: Blowing ON at flap clamp
1: Lower pickup folder
2: Blowing ON at flap clamp, blowing ON at folding plate for 10 mm
seam path
1: Lower pickup folder, blowing ON at flap clamp + folding plate
1: Blowing ON at flap clamp + folding plate
2: Lower pickup folder
1: Lower pickup folder
2: Blowing ON at folding plate 180 mm + blowing ON at flap clamp
1: Blowing ON at flap clamp, blowing ON at folding plate for 180 mm
seam path