Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 197
Fig. 168: Update the machine software (2)
The OP7000 detects the USB key and updates the control panel
software first.
Fig. 169: Update the machine software (3)
The update will take approx. 2 minutes.
Important
Do not switch off the machine while the update is in progress!
6. Remove the USB key when prompted to do so.
The machine restarts automatically.
The display shows notice 8403: Machine has an outdated program.
Should a new program be transmitted?
To Next Page
Loading...
