Operation
68 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
To position a flap and to start the sewing process:
1. Press the pedal forwards.
The folder (17) lowers.
2. Position the flap (10) on the left transport clamp at the stop (15) and
align in sewing direction.
• Left jacket front parts: Position the flap (10) at the rear stop (5) of
the folder (17).
• Right jacket front parts: Position the flap (10) at the front stop (7) of
the folder (17).
Information (745-35-10 A only)
Steps 3 and 4 depend on the closing order of the flap clamps that has
been set in the pocket parameters ( p. 127). They can also close in a
different order.
3. Press the pedal forwards.
Flap clamp (16) closes.
4. Press the pedal forwards.
Flap clamp (18) closes.
The sewing process starts.
To Next Page
Loading...
