DURKOPP ADLER 745-35-10 A - Page 89

Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 87
Changing the seam sequence template
Fig. 70: Changing the seam sequence template (1)
To change the seam sequence template:
1. Press the T01 button.
 The display switches to Select source of sequence.
Fig. 71: Changing the seam sequence template (2)
 The destination sequence is grayed out and cannot be selected.
Selectable
sequences
Display of the sequence
content