DURKOPP ADLER 745-35-10 A - Page 92

Programming
90 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Naming a seam sequence
Fig. 74: Naming a seam sequence (1)
To enter a name for a seam sequence:
1. Press the button S02-S20 (depending on which seam sequence you
have selected).
 The display switches to a keypad.
Fig. 75: Naming a seam sequence (2)
2. Enter the desired sequence name.
You can enter up to 18 characters.
Every sequence must be given a name.
3. Confirm with OK.