dynabook Satellite Pro L50-G - Installing Battery Pack

4.5 Battery Pack 4 Replacement Procedures
4-15 Satellite Pro L50-G / dynabookP*-C* MaintenanceManual
NOTE: Disposeof the usedbattery packsasrequired bylocal ordinances or
regulations.
Installing Battery Pack
Install battery pack according to the following proceduresandFigure 4-4.
CAUTION: The battery packscontain a lithium ion battery, which can explodedueto
improper replacement, use, handling, or disposal.Always disposeof the battery packs
asrequired bylocal ordinances or regulations. Use only replacement batteries
recommendedby Toshiba.
NOTE: Visually checkthe battery'sterminals. If theyare dirty, clean themwith a dry
cloth.
1. Take a new or recharged Battery Pack.
2. PlaceBattery Packin correct position.
3. SecureBattery with two M2.0x4.0 black Phillips headscrews.
4. Connect Battery cable to CN6050 on systemboard