dynabook Satellite Pro L50-G - LCD Module Mask; Installing LCD Module Mask

4.166 LCD Module Mask 4 Replacement Procedures
Satellite Pro L50-G / dynabookP*-C* MaintenanceManual 4-37
4.16 LCD Module Mask
NOTE: This chapter is only for Non-Touch SKU. Weprovide Touch Panel Assemblyfor
Touch SKU.
Removethe LCD Module Mask
Removing theLCD Module Mask according to the following proceduresandFigure 4-18
1. Insert your finger betweenthe edgeof LCD Module Mask andthe LCD panel by
twist in correct indication andfollow step1, 2 & 3 to releasethe latches.
2. Removethe LCD Module Mask while unlatching the LCD Module Mask.
Figure 4-18 Removingthe LCD Module Mask
Installing the LCD Module Mask
Install the LCD Module Mask according to the following proceduresandFigure 4-18.
1. Install the LCD Module Mask andfollow step3, 2 & 1 to press& lock the latches.
NOTE: Wheninstalling the LCD Module Mask, ensurethere is no gap betweenthe LCD
Module Mask and the LCD module cover.
NOTE: Do not lose the CameraShutter.