dynabook Satellite Pro L50-G - Speakerand Touch Pad(or Securepad); Removing Speakerand Touch Pad(or Securepad)

4.145 Speaker and Touch pad(or Securepad) 4 Replacement
Procedure
4-35 Satellite Pro L50-G / dynabookP*-C* MaintenanceManual
4.15 Speaker and Touch pad(or Secure pad)
Removing Speaker and Touch pad(or Securepad)
RemoveSpeakerand Touch pad(or Securepad) according to the following procedures
and Figure 4-17.
1. Disconnect touch pad cable and Securepad cable from Connectors on Touch pad(or
Secure pad).
2. Remove Touch pad cable and Secure padcable.
3. Remove three tapeswhich fasten Speakercable.
4. Removeleft and right Speaker.
5. Removetapeon upper left of Touch pad(or Securepad).
6. Removefive M2.0x1.8 black Phillips headscrewssecuring Touch pad(or Securepad).
7. Removegasketfrom Touch pad(or Securepad).
8. RemoveTouch pad(or Securepad).