dynabook Satellite Pro L50-G - Battery

2.9 SSD (Solid-stateDrive) 2 Troubleshooting
SatellitePro L50-G / dynabookP*-C* MaintenanceManual 2-17
Procedure 1 Test Program Check
               
           
            
Procedure 2 Connector Checkand Replacement Check
             
         
Check1 Make sure the following connectorshave been firmly connectedto the SSD
and systemboard.
If any connectorislooseor off, reconnectit firmly and return to Procedure1. If there is
still an error, perform Check2.
Check2 The SSDmaybe faulty. Replaceit with a new one following the instructions
in Chapter 4. If the problem persists,perform Check3.
Check3 The Systemboard maybe faulty. Replaceit with a new one following the
instructions in Chapter 4.
SSD
System Board