dynabook Satellite Pro L50-G - Installing LCD Module Assembly

4 ReplacementProcedures 4.10 LCD Module Assembly
Satellite Pro L50-G / dynabookP*-C* MaintenanceManual 4-26
Installing the LCD Module Assembly
Install the LCD Module Assembly according to the following proceduresandFigure 4-11.
1. Placethe LCD Module Assembly in the correct position.
2. SecureLCD Module Assembly with four M2.5x4.0 black Phillips headscrews.
(▲ mark portions)
3. CloseLCD Module Assembly.
4. Connect LCD cable to CN3000 & CN3001 on systemboard.
5. Routing LCD cable according to Figure 4-11, needto under Rib on Top Cover.
6. Stick tapeto fasten LCD cable.
7. Placeantennacablesin correct position.
8. Stick three mylar on top cover to fasten antennacables.