2.19 WirelessLAN 2 Troubleshooting
SatellitePro L50-G / dynabookP*-C* MaintenanceManual 2-27
2.19 Wireless LAN
Procedure1 Windows Application Test
Procedure 2 Connector Check and Replacement Check
Procedure 1 Windows Application Test
Procedure 2 Connector Check and Replacement Check
Check1 Make sure Wireless LANmodule hasbeen firmly connectedto the connector
on the systemboard. Alsomake sure Wireless LANmodule is free of foreign
matters.
Check2 Wireless LANModule may be faulty. Replaceit with a new one following the
stepsdescribedin Chapter 4. If Wireless LANModule replaced is still not
functioning properly, perform Check3.
Check3 SystemBoard may be defective. Replace SystemBoard with a new one
following the stepsdescribedin Chapter 4.
Wireless LAN
Module
System Board