dynabook Satellite Pro L50-G - CPU Cooling Module and Fan; Removing CPU Cooling Module and Fan

4 ReplacementProcedures 4.12 CPU Cooling Module and Fan
Satellite Pro L50-G / dynabookP*-C* MaintenanceManual 4-28
4.12 CPU Cooling Module and Fan
CAUTION: When removingCPU Cooling Module and Fan, keepfollowing in mind:
The CPU Cooling Module can becomevery hot during operation. Be sure to let it cool
downbefore starting the repair work. Hold Fan on its outline, donot presson its center.
Do not touch or causedamageto the fan in the CPU Cooling Module.
RemoveCPU Cooling Module and Fan
RemoveCPU Cooling Module and Fanaccording to the following proceduresand
Figures 4-13 and4-14.
1. Removefour M2.0x2.5 black Phillips headscrewssecuring CPU Cooling Module.
2. RemoveCPU Cooling Module.
3. Remove tape to release Fan cable.
4. Disconnect Fan cable from CN4300 on system board.
5. Removetwo M2.5x3.0 silver Phillips headscrewssecuring Fan.
6. Remove Fan and peel off the spongeon Fan.
Figure 4-13 Removingthe CPU Cooling Module and Fan