2.15 Smart card Port 2 Troubleshooting
SatellitePro L50-G / dynabookP*-C* MaintenanceManual 2-23
2.15 Smart card Port
Procedure1 Windows Application Test
Procedure 2 Connector Check and Replacement Check
Procedure 1 Windows Application Test
Procedure 2 Connector Check and Replacement Check
Check1 Make sure Smart CardBoard FFCCablehasbeen firmly connected to the
connector on SystemBoard. Alsomake sure Smart CardBoard is free of
foreign matters.
Check2 Smart CardBoardmay be faulty. Replaceit with a new one following the
stepsdescribedin Chapter 4. If Smart CardBoardreplaced is still not
functioning properly, perform Check3.
Check3 SystemBoard may be defective. Replace SystemBoard with a new one
following stepsdescribedin Chapter 4.
Smart card
Board
System Board