dynabook Satellite Pro L50-G - Installing Speakerand Touch Pad(or Securepad)

4 ReplacementProcedures 4.145 Speaker and Touch pad (or Secure
pad)
Satellite Pro L50-G / dynabookP*-C* MaintenanceManual 4-36
Figure 4-17 RemovingSpeakerand Touch pad(or Securepad)
Installing Speaker and Touch pad(or Securepad)
Install Speakerand Touch pad(or Securepad) according to the following proceduresand
Figure 4-17.
1. PlaceTouch pad(or Securepad) in correct position.
2. Stick Gasketin correct position.
3. SecureTouch pad(or Securepad) with five M2.0x1.8 black Phillips headscrews.
4. Stick tapeon Touch pad(or Securepad) in correct position
5. Placeleft andright Speakersin correct position
6. Route the speakercable in the wire guide according to Figure 4-17. Placethe cable
into the ditch andcorrect position. Avoid to pinching the cables.
7. Stick three tapesfor fasten speakercable in correct position.
8. Connect touch pad cable and Securepad cable to Connectors on Touch pad(or Secure
pad).