2 Troubleshooting 2.7 Display
2-14 SatellitePro L50-G / dynabookP*-C* MaintenanceManual
3. If there isstill an error, perform Check2.
Check2 The LCDcablemay be faulty. Replaceit with a new one and return to
Procedure3. If there isstill an error, perform Check3.
Check3 Make sure the LCDcable hasbeen firmly connected to the systemboard and
LCDmodule,if the cable islooseor off, reconnectit firmly and return to
Procedure3. If there isstill an error, perform Check4.
Check4 The LCDmodulemay be faulty. Replaceit with a new one and return to
Procedure3. If there isstill an error, perform Check5.
Check5 The Systemboard maybe faulty. Replaceit with a new one. If there is still
an error, perform Check6.
Check6 The memory maybe defective. Replacethe memory module with a new one
following the stepsdescribedin Chapter 4.
To Next Page
Loading...