- 7 -
2. Machine Information
2.1 Specifications
110VAC, 60Hz (Single Phase)
Minimum Carton Size
(Width x Height)
Standard Arch Size
(Width x Height)
Machine Dimensions
(Length x Width x Height)
2.2 Areas of Application
The strapping machine is to be used for strapping packages, cartons, paper boxes, newspapers,
magazines and those materials using a polypropylene (PP) strapping for stabilizing purposes when in
transportation. Be careful for rigidity of working materials, and don’t try to pack agri-foodstuffs or
other such material.
This machine was designed for certain applications only. We strongly recommend that this machine
NOT be modified and/or used for any application other than for which it was designed. If you have
any questions relative to its application DO NOT use the machine until you have had detail instruction
from your dealer.
2.3 Operating Environment
The strapping machine should be installed and operated in the following environment;
• Supply voltage: 0.9 - 1.1 nominal supply voltage
• Source frequency: 0.99 - 1.01 nominal frequency
• Ambient temperature: 5°C - 40°C (41℉-104℉).
• Altitude: shall be at altitudes up to 1000m above mean sea level.
• Relative humidity: not exceed 50% at 40°C.
• Atmosphere: Free from excessive dust, acid fume, corrosive gases and salt.
• Avoid exposing to abnormal vibration.
• Don't use machine in dangerous environment.
• Don't use machines in damp or wet locations, or expose them to rain.
• Please provide a suitable illumination around the machine for safety operation.
• Work place of user should have a fire extinguisher or other devices that meet their local safety
regulations, and always be careful.
• Internal parts requiring frequent inspection and adjustment, and maintenance areas must be
provided with a suitable illumination around the machine.
To Next Page
Loading...