For more information visit: www.EatonElectrical.com
Control commands for EZ700
MN05013001E86
Table 36: Operand overview
Table 37: Index 00 – Parameters
Example:
Data 1 (Byte 5) = 0x03 J The values of the year time switch
of channel A and B in the parameter menu.
Index
(hex)
Operand Read Write
00 ParametersJ Table 37 ×
01 Control byteJ Table 38 ×
Channel A × c
1
11 Time point ON × c
1
12 Time point OFF × c
1
Channel B × c
1
21 Time point ON × c
1
22 Time point OFF × c
1
Channel C × c
1
31 Time point ON × c
1
32 Time point OFF × c
1
Channel D × c
1
41 Time point ON × c
1
42 Time point OFF × c
1
1) The value can only be written if it is assigned to a constant in
the program.
2) The switch points are transferred in data bytes Data 1 – Data 3.
Meaning Bit 7 6 5 4 3 2 1 0
Appears in the parameter menu
Channel A
0/1
Channel B
0/1
Channel C 0/1
Channel D 0/1
Unused bits – – – –
To Next Page
Loading...
Need help?
General
