EDAN INSTRUMENTS VE-1010 - System Configuration; Basic Information Settings

VE-1010 Veterinary PC ECG User Manual Configuring the System
- 47 -
Chapter 8 Configuring the System
Click on the System Setting button on the Initial Interface (Figure 6-1) to open the System
Setting interface.
There are four tabs on the System Setting interface: Basic Information, Sample Setting, Device,
Print Setting and Others.
After you modify some information on the System Setting interface:
1. Click on the OK button to save these modifications and exit;
2. Or click on the Cancel button to cancel these modifications and exit.
8.1 Setting Basic Information
Click on the Basic Information tab on the System Setting interface to display the basic
information setup interface.
Figure 8-1 Basic Information Setup Interface