VE-1010 Veterinary PC ECG User Manual Safety Guidance
- 1 -
Chapter 1 Safety Guidance
This chapter provides important safety information related to the use of VE-1010 Veterinary
(hereinafter called VET) PC ECG.
1.1 Intended Use
VE-1010 VET PC ECG is a PC-based diagnostic tool intended to acquire, process and store ECG
signals from pets undergoing resting test. VE-1010 VET PC ECG is intended to be used only in
pet hospitals by trained veterinary surgeons or technicians or drug researchers. The cardiogram
recorded by VE-1010 VET PC ECG can help users to analyze and diagnose heart disease.
However the ECG with measurements and interpretive statements is offered to users on an
advisory basis only.
1.2 Warnings and Cautions
To use the system safely and effectively, firstly be familiar with the operation method of
Windows and read the user manual in detail to be familiar with the proper operation method for
the purpose of avoiding the possibility of system failure. The following warnings and cautions
must be paid more attention to during the operation of the system.
Note:
1. This system is not intended for home use.
2. The pictures and interfaces in this manual are for reference only.
WARNING
1. The system is intended to be used by trained veterinary surgeons or technicians or
drug researchers. They should be familiar with the contents of this user manual
before operation.
2. Only qualified service engineers can install this equipment, and only service
engineers authorized by the manufacturer can open the shell.
3. The results given by the system should be examined based on the overall clinical
condition of pets, and it can not substitute for regular checking.
4. This system is not intended for treatment.
5. This system is not designed for direct cardiac application.
6. Connecting to other devices may decrease the antistatic gradation of this device
during operation.
To Next Page
Loading...
Need help?
General
