VE-1010 Veterinary PC ECG User Manual Configuring the System
- 54 -
8.3.3 Setting Rhythm Lead
The rhythm lead can be one of 6 standard leads or 7 standard leads.
When the printing mode is set to 3×2+1 or 3×3+1, the rhythm lead selected in the Rhythm list
box will be printed out.
8.3.4 Defining Printing Format
1. Set Sequence to sequential or synchronous.
When Sequence is set to sequential, the lead group is printed one by one in a certain sequence.
The start time of a lead group is just the end time of the previous lead group.
When Sequence is set to synchronous, all leads are printed simultaneously. The start time of
each group is the same.
2. Set Paper to landscape or portrait.
3. Set Color to white-black or color.
Note: If the printing color is set to color, but a black-and-white printer is used, the report
printed will be illegible.
4. Select Auto gain change and the gain will be changed automatically.
5. Select Background grid and the background grid will be printed in the report.
Deselect Background grid and the background grid won’t be printed in the report.
6. Select Auto Baseline Change, the baseline will be adjusted automatically.
To Next Page
Loading...
Need help?
General
