8 | www.eddy.com
Reddy Overview
Positioning Reddy
Reddy must be properly positioned prior to use so that you do not run the risk of dropping the
instrument or the instrument falling over. Reddy has two safe operating positions: horizontal and tilted.
To use Reddy in a tilted position, simply pull out the stand located at the rear of the instrument until
Reddy is at the desired angle. If you are using Reddy with the optional harness, see Using the Optional
Harness on page 60 for details.
Figure 1–1 Reddy in the horizontal position
Figure 1–2 Reddy in the tilted position
To Next Page
Loading...