1-
The path to a specific menu option is written as:
Menu Level 1
→
Menu Level 2
→
Menu Level 3
Information with special note (such as safety information) is marked with a .
Additional noteworthy information is marked with a .
Mk10 Specific information will be marked with a . The name Mk10 refers to
either the Mk10, Mk10D, MK10A, or the Mk10E
Mk7 Specific information will be marked with a . The name Mk7 refers to
either the Mk7A or the Mk7C.
“Clicking” on a button or field means using the left mouse button.
Note that due to variations between computers and improvements in software, the
screenshots shown in this manual may vary slightly from the appearance of the software
on your system.
For more information
The best source of information should generally be this manual. The table of contents
has been organised to make finding information as easy as possible. If you are still
having problems though, EDMI support may be contacted via email at support@edmi-
meters.com The EDMI web site is located at http://www.edmi-meters.com/.
The online help of EziView also has a wealth of information, and contains more
information on advanced functions of EziView such as the scheduler, script files, and
reading files.
When contacting EDMI for support you may be asked for the meter serial number,
firmware version and EziView version. The serial number is printed on the label, and is
the serial number used in EziView to identify the meter. The EziView version is
available under Help
→
About in EziView.
All this information will help us help you.
1-2 EDMI Atlas Hardware Reference Manual
To Next Page
Loading...
Need help?
General
