Operating peripheral devices
EST2 System Operations Manual 4.3
Table 4-2: Controls
Switch Description
TOF set
(Top of Form)
Sets the top margin at the current location of the printhead. Make sure the
printer is offline if you manually set the paper at the page break.
Select Turns the printer online or offline. The Select switch also features an LED to
indicate whether the printer is online or offline.
Pitch
10
12
17
Sets the print character size.
10 characters per inch (recommended setting)
12 characters per inch
17 characters per inch
Mode
NLQ
Utility
HSD
Sets the print speed.
Near letter quality: slowest (not recommended)
Draft quality: medium (recommended setting)
High speed draft: fastest
On/Off Applies power to the printer in the On position. Removes power from the
printer in the Off position.
To Next Page
Loading...
