How to fix internal communication fault on EG4 6000XP Inverter?
To address an internal communication fault on your EG4 Inverter, restart the inverter. If the error persists, contact the distributor.
What to do for 'Internal communication fault 2' on EG4 6000XP Inverter?
If your EG4 Inverter displays 'Internal communication fault 2', restart the inverter. If the error continues, contact the distributor.
General| Nominal DC Voltage | 48V |
|---|---|
| Maximum DC Voltage | 500V |
| Maximum Continuous Output Power | 6000W |
| Frequency | 60Hz |
| Model | EG4-6000XP |
| Peak Power | 12000W |
| Protection Features | Over Voltage, Over Load, Over Temperature, Short Circuit |
| Cooling | Fan |
General safety instructions for inverter installation and operation.
Critical safety warnings and precautions for handling the inverter.
Overview of system connections including PV, battery, AC, and generator.
Details on connecting the Photovoltaic (PV) system to the inverter.
Specific instructions for connecting PV modules to the inverter.
Guidance on sizing PV strings for optimal performance and safety.
Step-by-step guide for safely wiring the PV connections to the inverter.
Instructions for properly connecting the battery cables to the inverter.
Instructions for properly connecting the battery cables to the inverter.
Detailed procedure for making AC connections to the inverter.
Information on connecting multiple inverters in parallel.
Step-by-step guide for safely starting up the inverter.
Step-by-step guide for safely shutting down the inverter.
Lists common error codes, their definitions, and troubleshooting steps.
Lists common warning codes, their definitions, and troubleshooting steps.
To Next Page
