ELDAN Recycling A/S Page 9
3.2 Technical Specifications for MPR200
Rotor length:- 2000 mm
Rotor diameter:- 400 mm
Cutting diameter:- 506 mm
R.P.M. of rotor:- 144
Cutting speed:- 3,82 m/sec
Knives:- 25 flying
26 static
Motor:- 2x110 kW 734 rpm, 50 Hz.
Belt drive:- 2x10 pcs SPC, length 5600 mm
Total weight:- Approx. 24.000 kg
Machine weight:- 11500 kg
Weight of inlet hopper:- 2300 kg
Weight of flywheel cover:- 500 kg/each
Motor for hopper lift:- P = 0,75 kW
Total width:- 3850 mm
Total height:- 4600 mm
Total length:- 3000 mm
Inlet height:- 4300 mm
To Next Page
Loading...